MOM_fixed_initialization.F90

!> Initializes fixed aspects of the model, such as horizontal grid metrics,
!! topography and Coriolis.
module mom_fixed_initialization
 
! This file is part of MOM6. See LICENSE.md for the license.
 
use mom_debugging, only : hchksum, qchksum, uvchksum
use mom_domains, only : pass_var
use mom_dyn_horgrid, only : dyn_horgrid_type, rescale_dyn_horgrid_bathymetry
use mom_error_handler, only : mom_mesg, mom_error, fatal, warning, is_root_pe
use mom_error_handler, only : calltree_enter, calltree_leave, calltree_waypoint
use mom_file_parser, only : get_param, read_param, log_param, param_file_type
use mom_file_parser, only : log_version
use mom_io, only : slasher
use mom_grid_initialize, only : initialize_masks, set_grid_metrics
use mom_open_boundary, only : ocean_obc_type
use mom_open_boundary, only : open_boundary_config, open_boundary_query
use mom_open_boundary, only : open_boundary_impose_normal_slope
use mom_open_boundary, only : open_boundary_impose_land_mask
! use MOM_shared_initialization, only : MOM_shared_init_init
use mom_shared_initialization, only : mom_initialize_rotation, mom_calculate_grad_coriolis
use mom_shared_initialization, only : initialize_topography_from_file, apply_topography_edits_from_file
use mom_shared_initialization, only : initialize_topography_named, limit_topography, diagnosemaximumdepth
use mom_shared_initialization, only : set_rotation_planetary, set_rotation_beta_plane, initialize_grid_rotation_angle
use mom_shared_initialization, only : reset_face_lengths_named, reset_face_lengths_file, reset_face_lengths_list
use mom_shared_initialization, only : read_face_length_list, set_velocity_depth_max, set_velocity_depth_min
use mom_shared_initialization, only : compute_global_grid_integrals, write_ocean_geometry_file
use mom_unit_scaling, only : unit_scale_type
 
use user_initialization, only : user_initialize_topography
use dome_initialization, only : dome_initialize_topography
use isomip_initialization, only : isomip_initialize_topography
use basin_builder, only : basin_builder_topography
use benchmark_initialization, only : benchmark_initialize_topography
use neverworld_initialization, only : neverworld_initialize_topography
use dome2d_initialization, only : dome2d_initialize_topography
use kelvin_initialization, only : kelvin_initialize_topography
use sloshing_initialization, only : sloshing_initialize_topography
use seamount_initialization, only : seamount_initialize_topography
use dumbbell_initialization, only : dumbbell_initialize_topography
use shelfwave_initialization, only : shelfwave_initialize_topography
use phillips_initialization, only : phillips_initialize_topography
use dense_water_initialization, only : dense_water_initialize_topography
 
use netcdf
 
implicit none ; private
 
public mom_initialize_fixed, mom_initialize_rotation, mom_initialize_topography
 
contains
 
! -----------------------------------------------------------------------------
!> MOM_initialize_fixed sets up time-invariant quantities related to MOM6's
!!   horizontal grid, bathymetry, and the Coriolis parameter.
subroutine mom_initialize_fixed(G, US, OBC, PF, write_geom, output_dir)
  type(dyn_horgrid_type),  intent(inout) :: g    !< The ocean's grid structure.
  type(unit_scale_type),   intent(in)    :: us   !< A dimensional unit scaling type
  type(ocean_obc_type),    pointer       :: obc  !< Open boundary structure.
  type(param_file_type),   intent(in)    :: pf   !< A structure indicating the open file
                                                 !! to parse for model parameter values.
  logical,                 intent(in)    :: write_geom !< If true, write grid geometry files.
  character(len=*),        intent(in)    :: output_dir !< The directory into which to write files.
 
  ! Local
  character(len=200) :: inputdir   ! The directory where NetCDF input files are.
  character(len=200) :: config
  character(len=40)  :: mdl = "MOM_fixed_initialization" ! This module's name.
  logical :: debug
! This include declares and sets the variable "version".
#include "version_variable.h"
 
  call calltree_enter("MOM_initialize_fixed(), MOM_fixed_initialization.F90")
  call log_version(pf, mdl, version, "")
  call get_param(pf, mdl, "DEBUG", debug, default=.false.)
 
  call get_param(pf, mdl, "INPUTDIR", inputdir, &
         "The directory in which input files are found.", default=".")
  inputdir = slasher(inputdir)
 
  ! Set up the parameters of the physical domain (i.e. the grid), G
  call set_grid_metrics(g, pf, us)
 
  ! Set up the bottom depth, G%bathyT either analytically or from file
  ! This also sets G%max_depth based on the input parameter MAXIMUM_DEPTH,
  ! or, if absent, is diagnosed as G%max_depth = max( G%D(:,:) )
  call mom_initialize_topography(g%bathyT, g%max_depth, g, pf, us)
!  call rescale_dyn_horgrid_bathymetry(G, US%Z_to_m)
 
  ! To initialize masks, the bathymetry in halo regions must be filled in
  call pass_var(g%bathyT, g%Domain)
 
  ! Determine the position of any open boundaries
  call open_boundary_config(g, us, pf, obc)
 
  ! Make bathymetry consistent with open boundaries
  call open_boundary_impose_normal_slope(obc, g, g%bathyT)
 
  ! This call sets masks that prohibit flow over any point interpreted as land
  call initialize_masks(g, pf, us)
 
  ! Make OBC mask consistent with land mask
  call open_boundary_impose_land_mask(obc, g, g%areaCu, g%areaCv, us)
 
  if (debug) then
    call hchksum(g%bathyT, 'MOM_initialize_fixed: depth ', g%HI, haloshift=1, scale=us%Z_to_m)
    call hchksum(g%mask2dT, 'MOM_initialize_fixed: mask2dT ', g%HI)
    call uvchksum('MOM_initialize_fixed: mask2dC[uv]', g%mask2dCu, &
                  g%mask2dCv, g%HI)
    call qchksum(g%mask2dBu, 'MOM_initialize_fixed: mask2dBu ', g%HI)
  endif
 
  ! Modulate geometric scales according to geography.
  call get_param(pf, mdl, "CHANNEL_CONFIG", config, &
                 "A parameter that determines which set of channels are \n"//&
                 "restricted to specific  widths.  Options are:\n"//&
                 " \t none - All channels have the grid width.\n"//&
                 " \t global_1deg - Sets 16 specific channels appropriate \n"//&
                 " \t\t for a 1-degree model, as used in CM2G.\n"//&
                 " \t list - Read the channel locations and widths from a \n"//&
                 " \t\t text file, like MOM_channel_list in the MOM_SIS \n"//&
                 " \t\t test case.\n"//&
                 " \t file - Read open face widths everywhere from a \n"//&
                 " \t\t NetCDF file on the model grid.", &
                 default="none")
  select case ( trim(config) )
    case ("none")
    case ("list") ; call reset_face_lengths_list(g, pf, us)
    case ("file") ; call reset_face_lengths_file(g, pf, us)
    case ("global_1deg") ; call reset_face_lengths_named(g, pf, trim(config), us)
    case default ; call mom_error(fatal, "MOM_initialize_fixed: "// &
      "Unrecognized channel configuration "//trim(config))
  end select
 
  !   This call sets the topography at velocity points.
  if (g%bathymetry_at_vel) then
    call get_param(pf, mdl, "VELOCITY_DEPTH_CONFIG", config, &
                   "A string that determines how the topography is set at "//&
                   "velocity points. This may be 'min' or 'max'.", &
                   default="max")
    select case ( trim(config) )
      case ("max") ; call set_velocity_depth_max(g)
      case ("min") ; call set_velocity_depth_min(g)
      case default ; call mom_error(fatal, "MOM_initialize_fixed: "// &
        "Unrecognized velocity depth configuration "//trim(config))
    end select
  endif
 
!    Calculate the value of the Coriolis parameter at the latitude   !
!  of the q grid points [s-1].
  call mom_initialize_rotation(g%CoriolisBu, g, pf, us=us)
!   Calculate the components of grad f (beta)
  call mom_calculate_grad_coriolis(g%dF_dx, g%dF_dy, g, us=us)
  if (debug) then
    call qchksum(g%CoriolisBu, "MOM_initialize_fixed: f ", g%HI, scale=us%s_to_T)
    call hchksum(g%dF_dx, "MOM_initialize_fixed: dF_dx ", g%HI, scale=us%m_to_L*us%s_to_T)
    call hchksum(g%dF_dy, "MOM_initialize_fixed: dF_dy ", g%HI, scale=us%m_to_L*us%s_to_T)
  endif
 
  call initialize_grid_rotation_angle(g, pf)
 
! Compute global integrals of grid values for later use in scalar diagnostics !
  call compute_global_grid_integrals(g, us=us)
 
! Write out all of the grid data used by this run.
  if (write_geom) call write_ocean_geometry_file(g, pf, output_dir, us=us)
 
  call calltree_leave('MOM_initialize_fixed()')
 
end subroutine mom_initialize_fixed
 
!> MOM_initialize_topography makes the appropriate call to set up the bathymetry.  At this
!! point the topography is in units of [m], but this can be changed later.
subroutine mom_initialize_topography(D, max_depth, G, PF, US)
  type(dyn_horgrid_type),           intent(in)  :: g  !< The dynamic horizontal grid type
  real, dimension(G%isd:G%ied,G%jsd:G%jed), &
                                    intent(out) :: d  !< Ocean bottom depth [m]
  type(param_file_type),            intent(in)  :: pf !< Parameter file structure
  real,                             intent(out) :: max_depth !< Maximum depth of model [m]
  type(unit_scale_type),  optional, intent(in)  :: us !< A dimensional unit scaling type
 
  ! This subroutine makes the appropriate call to set up the bottom depth.
  ! This is a separate subroutine so that it can be made public and shared with
  ! the ice-sheet code or other components.
 
  ! Local variables
  real :: m_to_z, z_to_m  ! Dimensional rescaling factors
  character(len=40)  :: mdl = "MOM_initialize_topography" ! This subroutine's name.
  character(len=200) :: config
 
  m_to_z = 1.0 ; if (present(us)) m_to_z = us%m_to_Z
  z_to_m = 1.0 ; if (present(us)) z_to_m = us%Z_to_m
 
  call get_param(pf, mdl, "TOPO_CONFIG", config, &
                 "This specifies how bathymetry is specified: \n"//&
                 " \t file - read bathymetric information from the file \n"//&
                 " \t\t specified by (TOPO_FILE).\n"//&
                 " \t flat - flat bottom set to MAXIMUM_DEPTH. \n"//&
                 " \t bowl - an analytically specified bowl-shaped basin \n"//&
                 " \t\t ranging between MAXIMUM_DEPTH and MINIMUM_DEPTH. \n"//&
                 " \t spoon - a similar shape to 'bowl', but with an vertical \n"//&
                 " \t\t wall at the southern face. \n"//&
                 " \t halfpipe - a zonally uniform channel with a half-sine \n"//&
                 " \t\t profile in the meridional direction. \n"//&
                 " \t bbuilder - build topography from list of functions. \n"//&
                 " \t benchmark - use the benchmark test case topography. \n"//&
                 " \t Neverworld - use the Neverworld test case topography. \n"//&
                 " \t DOME - use a slope and channel configuration for the \n"//&
                 " \t\t DOME sill-overflow test case. \n"//&
                 " \t ISOMIP - use a slope and channel configuration for the \n"//&
                 " \t\t ISOMIP test case. \n"//&
                 " \t DOME2D - use a shelf and slope configuration for the \n"//&
                 " \t\t DOME2D gravity current/overflow test case. \n"//&
                 " \t Kelvin - flat but with rotated land mask.\n"//&
                 " \t seamount - Gaussian bump for spontaneous motion test case.\n"//&
                 " \t dumbbell - Sloshing channel with reservoirs on both ends.\n"//&
                 " \t shelfwave - exponential slope for shelfwave test case.\n"//&
                 " \t Phillips - ACC-like idealized topography used in the Phillips config.\n"//&
                 " \t dense - Denmark Strait-like dense water formation and overflow.\n"//&
                 " \t USER - call a user modified routine.", &
                 fail_if_missing=.true.)
  max_depth = -1.e9*m_to_z ; call read_param(pf, "MAXIMUM_DEPTH", max_depth, scale=m_to_z)
  select case ( trim(config) )
    case ("file");      call initialize_topography_from_file(d, g, pf, us)
    case ("flat");      call initialize_topography_named(d, g, pf, config, max_depth, us)
    case ("spoon");     call initialize_topography_named(d, g, pf, config, max_depth, us)
    case ("bowl");      call initialize_topography_named(d, g, pf, config, max_depth, us)
    case ("halfpipe");  call initialize_topography_named(d, g, pf, config, max_depth, us)
    case ("DOME");      call dome_initialize_topography(d, g, pf, max_depth, us)
    case ("ISOMIP");    call isomip_initialize_topography(d, g, pf, max_depth, us)
    case ("bbuilder");  call basin_builder_topography(d, g, pf, max_depth)
    case ("benchmark"); call benchmark_initialize_topography(d, g, pf, max_depth, us)
    case ("Neverworld","Neverland"); call neverworld_initialize_topography(d, g, pf, max_depth)
    case ("DOME2D");    call dome2d_initialize_topography(d, g, pf, max_depth)
    case ("Kelvin");    call kelvin_initialize_topography(d, g, pf, max_depth, us)
    case ("sloshing");  call sloshing_initialize_topography(d, g, pf, max_depth)
    case ("seamount");  call seamount_initialize_topography(d, g, pf, max_depth)
    case ("dumbbell");  call dumbbell_initialize_topography(d, g, pf, max_depth)
    case ("shelfwave"); call shelfwave_initialize_topography(d, g, pf, max_depth, us)
    case ("Phillips");  call phillips_initialize_topography(d, g, pf, max_depth, us)
    case ("dense");     call dense_water_initialize_topography(d, g, pf, max_depth)
    case ("USER");      call user_initialize_topography(d, g, pf, max_depth, us)
    case default ;      call mom_error(fatal,"MOM_initialize_topography: "// &
      "Unrecognized topography setup '"//trim(config)//"'")
  end select
  if (max_depth>0.) then
    call log_param(pf, mdl, "MAXIMUM_DEPTH", max_depth*z_to_m, &
                   "The maximum depth of the ocean.", units="m")
  else
    max_depth = diagnosemaximumdepth(d,g)
    call log_param(pf, mdl, "!MAXIMUM_DEPTH", max_depth*z_to_m, &
                   "The (diagnosed) maximum depth of the ocean.", units="m", like_default=.true.)
  endif
  if (trim(config) /= "DOME") then
    call limit_topography(d, g, pf, max_depth, us)
  endif
 
end subroutine mom_initialize_topography
 
end module mom_fixed_initialization